IOMA IO-SG411Q 4+2+1 1000M POE Switch

Name: IOMA IO-SG411Q 4+2+1 1000M POE Switch
Brand: IOMA
SKU: IOMA IO-SG411Q

IOMA IO-SG411Q
4+2+1
1000M
POE Switch

Port Characteristics
Fixed Port   Downlink port   4* 10/100Base-TX RJ45 network port
   Uplink port   1* 10/100/1000Base-T RJ45 network port
1* 1000M SFP optical port slot
   PoE port   1-4 support af/at standard PoE power supply, transmission distance 100metres
Port Characteristics   1-5 port 10/100/1000M adaptive, full/half duplex MDI/MDI-X adaptive
Twisted Pair Transmission   10BASE-T：Cat3,4,5 UTP(≤100 meters)
100BASE-TX：Cat5 or later UTP(≤100 meters)
1000BASE-T：Cat5e or later UTP(≤100 meters)
Optical Port Characteristics   Gigabit SFP fibre optic interface, default does not support optical module, need to purchase separately, (optional order mode/multimode, single/dual fibre optical module, LC/SC)
Fibre-optic Cable   Multimode ：850nm 0～550M ， 50μm/125μm&62.5μm/125μm
Single mode ：1310nm 0～40KM ， 1550nm 0～120KM 9.5μm/125μm
Function Switch   Tranche1：VLAN   Toggle to "ON" to realize the function of power supply port isolation, default "OFF"
   Tranche2：PoE Watchdog   Toggle to"ON" to enable the PoE auto restart function of the power supply port, default "OFF"
   Tranche3：Extend   Toggle to "ON" to turn on the power port to achieve 10m/250m long distance function, default "OFF"
Switching Chip Parameter
Network Management Type   Unmanaged switch
Networking Protocol   IEEE802.3 10BASE-T；
IEEE802.3i 10Base-T；
IEEE802.3u 100Base-TX；
IEEE802.3x Flow Control；
IEEE802.3ab 1000Base-T；
IEEE802.3z 1000Base-X；
IEEE 802.3af DTE Power via MDI；
IEEE 802.3at DTE Power via MDI；
Transfer Mode   Store-and-forward（top speed）
Backplane Bandwidth   12Gbps（non-obstructive）
Packet Forwarding Ratio@64byte   8.92Mpps
MAC Address Table   2K
Packet Forwarding Cache   2Mbits
Giant Frame   9.2Kbytes
Indicator Light   Power indicator: PWR (green); Network indicator: Link/Act (green);
Optical port indicator: SFP (green)
MTBF   100,000 hours
POE and Power Characteristics
POE Port   1-4 ports support IEEE802.3af/at standard POE power supply
Power Supply Pins   Default 1/2(+), 3/6(-) 4-pole power supply
Maximum PoE power per port   30W, standard IEEE802.3af/at
Total Power/
Input Voltage   65W （AC100-240V）
Power Consumption   Standby power consumption: <5W; Full load power consumption: <65W
Matching power supply   Built-in switching power supply AC：100～240V 50-60Hz 1.0A
Physical Specification Parameters
Operating Temperature/Humidity   -20～+55°C；5%～90% RH,non-condensing
Storage Temperature/Humidity   -40～+75°C；5%～95% RH,non-condensing
Appearance Size (L*W*H)   200mm*118mm*44mm
Net/Gross weight   0.58kg / 0.79kg
Installation Method   Desktop, wall mounted
Product Certification And Warranty
Lightning Protection / Protection Level   Port lightning protection：4KV 8/20us；
Protection Level：IP30
Safety Certification   CE,FCC,RoHS